Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration work we handle
See the difference
Before
After
Before
After
Before
AfterHow Much Does Water Damage Restoration Cost in Brooklyn?
Our Water Damage Restoration services in Brooklyn, NY typically cost between $2,500 and $7,500 for a standard Category 1 or 2 water loss affecting one or two rooms. Smaller, contained leaks like a sink overflow or water heater drip often fall in the $800 to $1,800 range, while a full finished-basement flood or sewage backup can push past $15,000. We write the full price down before any work starts, so the number you see on paper is the number you pay.
Key Takeaways
- Average Brooklyn water damage restoration job falls between $2,500 and $7,500.
- Water extraction alone ranges from $500 to $2,500 depending on square footage and standing water depth.
- Structural drying with professional equipment runs $1,200 to $4,500 for most 500 – 1,200 sq. ft. spaces.
- Insurance typically covers sudden, accidental water damage but not slow leaks or pre-existing maintenance issues.
- Keegan Restoration Brooklyn gives a written price before work begins, backed by the 365-Day Done Right Promise.
Water Damage Restoration Cost Breakdown (2026)
Here’s what we’re seeing across Brooklyn in 2026 based on the jobs our crews run. These are real market ranges, not brochure numbers. Prices reflect the borough’s mix of pre-war brownstones, postwar brick apartment buildings, and newer condo conversions, each of which presents different access and construction challenges.
| Service Line Item | Typical Brooklyn Range | What It Covers |
|---|---|---|
| Emergency water extraction | $500 – $2,500 | Standing water removal with truck-mounted or portable extraction units from Dri-Eaz and XPOWER. Price scales with water depth, square footage, and how long water sat before we arrived. |
| Structural drying (3 – 5 days) | $1,200 – $4,500 | Placement and monitoring of high-velocity air movers and LGR dehumidifiers from Dri-Eaz and Phoenix. Includes daily moisture mapping to track dry-down progress. |
| Demolition and debris removal | $400 – $3,000 | Cutting and removing wet drywall, baseboards, carpet, padding, and insulation. In older Brooklyn buildings with plaster walls, this often costs more because plaster holds water longer and requires careful cutting to preserve original features. |
| Antimicrobial treatment | $200 – $1,200 | EPA-registered treatment applied to affected framing and surfaces after drying. Mold growth starts in 48 – 72 hours, so this step is non-negotiable on Category 2 and 3 water losses. |
| Content drying and cleaning | $300 – $2,000 | Moving and drying furniture, clothing, boxes, and personal items. Some items go to our Injectidry floor-mat drying system for hardwood and laminate that can be saved in place. |
| Deodorization and air scrubbing | $250 – $900 | HEPA air scrubbers from B-Air run during and after the job to pull airborne particles and odors out of the air. |
| Repairs and reconstruction | $800 – $8,000+ | Replacing drywall, insulation, flooring, trim, and paint to return the space to pre-loss condition. This is the widest variable in Brooklyn because material access in some buildings means parking permits, stair-carry work, and limited work hours imposed by co-op or condo boards. |
A contained bathroom leak with tile floor may only need extraction and targeted drying for under $1,000. A kitchen sink supply line that burst while you were at work and poured water for six hours will land closer to $4,000 – $6,000 once you factor in cabinet removal, drywall cut-out, and drying behind the cabinets. We put every one of these line items in writing before the first piece of equipment comes off the truck.
What Affects Water Damage Restoration Pricing in Brooklyn
Brooklyn is not one market. A ground-floor unit in Park Slope with a finished cellar prices differently than a fourth-floor walk-up in Bushwick or a detached house in Marine Park. Here’s what actually moves the number.
- Water category. Category 1 clean water from a supply line is the cheapest to mitigate. Category 2 gray water from dishwashers and washing machines costs more because of contamination risk. Category 3 black water from sewage backups or outside flooding requires full containment, disposal of porous materials, and deeper antimicrobial work. In neighborhoods like Gowanus and Red Hook where combined sewer overflows happen after heavy rain, Category 3 jobs are a regular occurrence.
- How long the water sat. The difference between a leak found at 9am and one discovered after a weekend away is significant. Water that sits for 48+ hours wicks up drywall, under baseboards, and into subfloor. The scope of loss expands, and so does the price.
- Building type and access. Pre-war brownstones in areas like Bed-Stuy and Fort Greene often have lathe-and-plaster walls that hold moisture longer than drywall and require more aggressive drying plans. Walk-up apartments with narrow stairwells mean our techs carry equipment by hand instead of rolling it in. Buildings with freight elevator restrictions or co-op board work-hour rules add time. Time is a direct cost driver in mitigation work.
- Square footage affected. More water, more square feet, more equipment. A 200 sq. ft. laundry room needs two or three air movers and one dehumidifier. A 1,000 sq. ft. finished basement needs a full drying array and possibly desiccant drying for dense materials like plaster and old-growth framing.
- What got wet. Tile over concrete dries fast and usually survives. Hardwood floors, especially the older oak and maple commonly found in Brooklyn townhouses, can sometimes be saved with Injectidry mat drying but often require board replacement. Custom cabinetry, built-ins, and original molding that need hand-drying or careful removal add labor hours.
- Mold presence. If microbial growth is already visible when we arrive, the job shifts into mold remediation alongside water mitigation. That carries its own cost scale, usually starting around $1,500 for isolated growth and going up from there.
Can You Fix Water Damage the Same Day in Brooklyn?
If you need Water Damage Restoration Near Me in Brooklyn, NY, in most cases we can start mitigation the same day you call. Our Brooklyn crew begins with extraction within hours of dispatch, and the drying equipment gets placed the same visit. The full restoration process, meaning dry-down, antimicrobial treatment, and reconstruction, takes 3 to 7 days for most standard losses. A live person answers our phones 24/7, including nights, weekends, and holidays. When water is actively running into your unit, waiting until Monday is the most expensive decision you can make.
What you can do immediately, before we arrive, is shut off the water source if it’s safe to access and move small items out of the path of water. We don’t recommend any demolition work on your own. Wet drywall and carpet hide electrical wiring and supply lines. Let the crew handle it.
Is It Cheaper to Repair or Replace After Water Damage?
For most building materials, replacement is cheaper than attempting to dry and save them. Drywall, insulation, carpet pad, and laminate flooring are disposable by design. Cut them out, dry the framing, replace with new. What is worth saving: solid hardwood flooring, especially the old-growth strips in Brooklyn townhomes that would cost $12 – $18 per square foot to replace with matching material. Subfloor and structural framing are also saved whenever possible, which is what our drying plan targets. The cost crossover is usually around $4 – $6 per square foot of material. Below that, replace. Above that, dry and save. We’ll tell you which side of that line each affected surface falls on, in writing, before we touch it.
Does Insurance Cover Water Damage Restoration in Brooklyn?
Most standard homeowners policies in New York cover sudden, accidental water damage from burst pipes, appliance failures, and water heater ruptures. They do not cover slow leaks that happened over months, groundwater seepage through foundations, or flood damage from outside water, which requires separate flood insurance through the NFIP. Sewage backup coverage is usually an add-on rider; without it, a Category 3 backup is out of pocket.
The practical difference for you is documentation. Your adjuster needs a scope of loss showing exactly what was wet, a moisture map showing what got dried, and a line-item breakdown of labor and equipment. We document every job to support your insurance claim, formatted the way adjusters expect to see it. Our Water Damage Restoration in Brooklyn service includes this documentation on every job.
How to Save on Water Damage Restoration
- Call the same day you notice the leak. Every hour water sits in contact with drywall, flooring, and framing expands the scope of loss. A $900 mitigation job becomes a $4,500 mitigation job in 48 hours. This is the single biggest cost lever in your control.
- Keep maintenance records. If a water heater fails and you have receipts showing it was installed three years ago and serviced, your claim goes smoother. If it’s a 19-year-old unit with no service history, the adjuster has questions about pre-existing neglect.
- Document everything you can before we arrive. Photos and video of standing water, damaged materials, and the water source. It helps your claim and helps our scope of loss.
- Don’t over-report your loss. Some homeowners hear “water damage” and report every item in the room. Adjusters pick apart inflated claims and can delay the whole payout. We’ll give you an honest scope, and the claim proceeds from there.
- Get the free estimate before committing to anything. No obligation estimates are free at Keegan Restoration Brooklyn. Call (607) 325-7185 and a live person talks through what you’re looking at, what we’d likely find, and what it typically runs in your part of the borough.
How Much Does a Burst Pipe Cost in Brooklyn?
A Burst Pipe Restoration in a Brooklyn apartment or house typically costs $3,000 to $9,000 all-in, including extraction, drying, demolition, and repair to pre-loss condition. The pipe repair itself is separate, handled by a plumber and usually running $300 to $800 for the line fix. The bigger variable is what the pipe ran through. A burst line inside a wall that floods a hardwood floor living room costs more than a burst line in an unfinished basement with concrete slab. If the wall is finished on both sides with plaster, you’re adding containment and careful demo to the scope.
How Much Does a Sewage Backup Cost in Brooklyn?
Sewage backup restoration in Brooklyn runs $4,000 to $15,000 depending on square footage and what got contaminated. Category 3 water means full PPE for the crew, containment barriers, disposal of porous materials including carpet and drywall, and antimicrobial treatment on the remaining structure. In neighborhoods served by the older combined sewer network, including parts of Carroll Gardens, Cobble Hill, and downtown Brooklyn, heavy rain events can push sewage back through floor drains in basements. If you’re in one of those areas, a backwater valve installation from a licensed plumber is worth considering. That’s a plumbing job, not a restoration job, but it prevents the next call to us.
Why Does Drying Equipment Run for So Many Days?
Structural drying follows the psychrometric curve, not a calendar. We measure moisture content daily with penetrating and non-penetrating meters, and we pull equipment only when the materials reach their dry standard. In Brooklyn’s summer humidity, especially July and August when outdoor dew points sit in the upper 60s and low 70s, drying takes longer because the air holds more moisture. Our dehumidifiers work harder to pull grain depression, and we adjust the equipment layout daily. Pulling fans and dehumidifiers too early leaves moisture trapped in wood and drywall, which is how hidden mold becomes a problem six months later. We don’t do that. We run the equipment until the numbers say the job is dry, and we document every reading.
Steps in a Brooklyn Water Damage Restoration Job
Here’s the sequence we follow on every water loss in the borough, from the first call to the final walkthrough. The same steps apply whether it’s a Park Avenue co-op, a Bay Ridge rowhouse, or a Williamsburg rental unit.
- Emergency contact and dispatch. You call (607) 325-7185. A live person answers, asks the right questions, and dispatches a Brooklyn crew. We arrive inside the window we give you.
- Inspection and scope of loss. We find the water source if it isn’t obvious, identify the water category, measure moisture levels in affected and adjacent materials, and photograph everything. This becomes the foundation of your insurance claim file.
- Written estimate, before work starts. You get a line-item price covering extraction, drying, demolition, and mitigation. This price does not move at the door. If we find something behind a wall that changes scope, we stop and tell you before touching it.
- Water extraction. Standing water comes out with truck-mounted or portable extraction units. For dense materials, we use weighted extraction like the XPOWER and Dri-Eaz units to pull water from carpet and pad.
- Demolition of unsalvageable materials. Wet drywall, insulation, baseboards, and carpet pad get cut out and removed. We cut square lines, not ragged edges, because square lines make the rebuild phase faster and cheaper.
- Drying setup and monitoring. Air movers, dehumidifiers, and HEPA scrubbers go in. For hardwood we place Injectidry mats to pull water through the flooring system without tearing it out. We return daily to take moisture readings and reposition equipment.
- Antimicrobial treatment. Once materials are dry, we treat affected framing and surfaces to prevent mold growth. This is standard on every job, not an upcharge.
- Final walkthrough and documentation. We walk you through the moisture readings, show you the dry standard on paper, and hand over the documentation package for your claim. Every repair is backed in writing by the 365-Day Done Right Promise: if it fails in the first year, we return and make it right at no charge.
FAQs – Water Damage Restoration Cost
How much does water damage restoration cost per square foot in Brooklyn?
Brooklyn Basement Water Removal and mitigation runs $6 to $12 per square foot, which includes extraction, drying, and antimicrobial treatment. Repairs add another $8 to $20 per square foot depending on finishes. A 400 sq. ft. finished basement with a Category 1 loss at the low end might total $2,400 for mitigation only. The same space with a Category 3 sewage backup and flooring replacement could run $10,000 to $14,000. Call (607) 325-7185 for a free estimate with a written price before any work begins.
How much does water extraction cost in Brooklyn?
Standalone water extraction in Brooklyn typically costs $500 to $2,500 depending on the size of the affected area and the amount of standing water. A small contained leak in one bathroom might be extracted for under $600. A finished basement with three inches of standing water across 800 square feet is more likely $1,500 to $2,500 for extraction alone. Extraction is only step one; drying equipment and labor are billed separately. Ask for a line-item breakdown when you call (607) 325-7185.
Does homeowners insurance cover water damage from a leaking roof in Brooklyn?
Yes, if the roof damage was caused by a covered peril like wind or hail. A slow leak from worn-out roofing material that you should have maintained is typically denied, because insurance covers sudden accidents, not deferred maintenance. Water damage from a covered roof leak usually reimburses interior restoration including drying and repair, though the roof repair itself is often subject to a separate deductible and depreciation schedule. Call (607) 325-7185 and we’ll help you document the loss in the format your adjuster needs.
How long does water damage restoration take in Brooklyn?
Most Brooklyn residential water damage restoration jobs take 3 to 7 days from first response to dry-down complete. Drying equipment runs 3 to 5 days on average. Reconstruction and finishing add another 3 to 10 days depending on materials and finish work. You can usually move back into the home before reconstruction starts, as long as the affected area is contained and safe. Call (607) 325-7185 and we’ll give you a timeline based on your specific situation.
How much does mold remediation cost after water damage in Brooklyn?
Mold remediation following water damage in Brooklyn starts around $1,500 for isolated growth in a small area and runs up to $8,000+ for widespread contamination behind walls or under flooring. The best way to avoid mold remediation costs is to dry the water loss correctly the first time. That’s what our drying plans are built to do, with daily moisture readings to confirm the structure hits dry standard before equipment comes out. If mold is already present when we arrive, we handle the mold remediation as part of the same job. Call (607) 325-7185 to talk through what you’re seeing.
Call Keegan Restoration Brooklyn
If you have water in your home right now, or you just discovered a leak that’s been going for a while, call (607) 325-7185. A live person answers. We’ll ask you a few questions, tell you what we think you’re dealing with, and dispatch a crew to your address in Brooklyn. The estimate is free, the price is written before work starts, and the work is backed by the 365-Day Done Right Promise. Shane Pruitt leads our Brooklyn team, and every job runs to The Garrison Standard: show up inside the window, price in writing, do it by the book, leave the site clean, stand behind the work for a full year.
Part of the Garrison Partners family since 2005, Keegan Restoration Brooklyn handles water damage restoration, fire damage restoration, and mold remediation across the borough. No bait-and-switch pricing, nobody moving the number at the door, nobody without a background check walking through your house. Just crews in uniform with professional-grade equipment from Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry, doing the work to IICRC, RIA, and IFA industry standards and documenting every step for your insurance claim.
Pricing reflects the Brooklyn market as of 2026. Keegan Restoration Brooklyn offers free estimates – call (607) 325-7185.
What Our Customers Say
"Overall great. One technician no-showed on day two but the lead covered it and they finished on schedule."
- Wes K."Documented everything with photos for my insurance. No arguments from the adjuster."
- Carmen R."Water heater burst in the garage and flooded the hall. Crew was there fast, in uniform, set up dehumidifiers and air movers, and ran drying logs every day. Veteran-owned and organized."
- Gail S.